IBC systems
standard IBC (intermediate bulk container)
applications
transport and storage of liquid products for the chemical, petrochemical, paint and coating industries as well as for the food industry, e.g. paints, coatings, lubricants, solvents
approvals and certification
UN 31A/Y approved as intermediate bulk container (IBC) in accordance with ADR, RID and IMDG-code, chapter 6.5 for the transport of liquid hazardous material in packing groups II and III by sea, rail and road;
according to the european pressure equipment directive PED 2014/68/EU and with CE mark;
in compliance with the EU regulation EC 1935/2004;
active storage as collection container for flammable liquids and liquids hazardous to water
design
material:
material of construction: stainless steel 1.4301 (aisi 304), 1.4404 (aisi 316L), 1.457 (aisi 316Ti) or upon customer´s request material of support frame: steel, hot dip galvanized in compliance with EN ISO 1461, optionally stainless steel 1.4301 (aisi 304)
top:
manhole DN 400 or DN 457 with screw lid or clamping ring lid, 1“ nipple with pressure relief valve and 1“ venting nozzle or according to customer´s request
bottom:
deep-drawn bottom outlet with minimal dead space, with ball valve or butterfly valve and connections according to customer´s needs
support frame:
with bottom clearance for floor-borne vehicles, transportable by crane, with forklift pockets, stackable, optional design with end-to-end tunnels or design allowing transport by roller conveyor
technical details:
filling- and drain pressure 0.65 bar, filling material density up to 2.0 kg/l, optionally up to 2.9 kg/l
maximum permissible gross mass:
2.269 kg
various outlet fittings are available according to customer´s needs
type
capacity
dimensions (mm/inch)
weight
liters/gal
width x lenght x height
kg/lbs
ibc 500
500
1100 x 1200 x 1100
225
ibc 800
800
1100 x 1200 x 1440
255
ibc 1000
1000
1100 x 1200 x 1660
275
ibc 1100
1100
1100 x 1200 x 1795
285
ibc 1250
1250
1200 x 1200 x 1935
295
